• Model NO.：8*10IN,10*12IN,11*14IN,14*17in
• Transport Package：Box
• Specification：8*10IN,10*12IN,11*14IN,14*17in
• Trademark：filim
• Origin：Intersection of Mongolia Road and Shenyang Road, B

Basic Info.

Model NO. 8*10IN/10*12IN/11*14IN/14*17in Transport Package Box Specification 8*10IN/10*12IN/11*14IN/14*17in Trademark filim Origin Intersection of Mongolia Road and Shenyang Road, B

Product Description

[working principle] all types of thermal films produced by Hefei ferim Technology Co., Ltd. can print medical images clearly, using high-quality pet base film and coating materials, after repeated coating treatment, printing and imaging through various types of printers. The printing image is clear, waterproof, wear-resistant, non fading, easy to use and economical. It can meet the requirements of medical image printing.
[scope of application]
It is used to record medical images (CT, MRI, Cr, Dr, etc.) as diagnostic basis.
[product specification]
A3,A4,16K,B5,14*17in,13*17in,11*14in,10*12in,8*10in
[precautions]
1. The product is disposable. It is used for people who need to take medical images.
2. The film stored at low temperature should be taken out before use, and the package should be balanced in the use environment for 4 hours before opening the package for use, so as to avoid water vapor condensation on the film surface and damage to the film. Take and place the film carefully, do not squeeze, fold, twist and rub the film to avoid artifacts and static traces, and do not use wet hands to hold the film.
3. If it is used in combination with the medical printer, the film may have image problems due to the equipment, and the Engineer shall be contacted in time for treatment.
4. High storage temperature is easy to cause film adhesion.
5. The waste pieces produced after using this product shall be disposed according to local laws and regulations.
6. This product needs to be used in combination with the printer, and it needs to be operated by professional trained nurses or doctors.


[packaging]
Each feeding box holds 100 films,
[transportation]
The products can be transported by general means of transportation, and shall be protected from sunlight and rain during transportation, and shall not be mixed with inflammable and toxic substances.
[storage]
The product should be stored in a cool and dry place, the storage temperature should not exceed 30 ºC, and the relative humidity should be 15% - 65%. The product should not be damaged by acid, alkali and other harmful gases, and should not be mixed with toxic and flammable substances. When stacking, it shall be 15cm above the ground and wall, and the stacking height shall not exceed 150cm.
Under the storage and transportation conditions specified in this standard, the shelf life of unsealed products is 24 months from the date of production.