• Model NO.：XR-antigen test
• Trademark：OEM
• Origin：China
• Production Capacity：100000sets Each Month

Basic Info.

Model NO. XR-antigen test Trademark OEM Origin China Production Capacity 100000sets Each Month

Product Description

Antigen Rapid Test Cassette, Oropharyngeal Antigen Test
The Antigen Rapid Test Cassette is a rapid chromatographic immunoassay for the qualitative detection of antigen in human oropharyngeal swabs.
The Antigen Rapid Test Cassette is a qualitative, lateral flow immunoassay for the detection of the N protein in human oropharyngeal swabs In this test, antibody specific to the N protein is separately coated on the test line regions of the test cassette.
During testing, the extracted specimen reacts with the antibody to N protein  that are coatedonto particles.
The mixture migrates up the membrane to react with the antibody to N protein which on the membrane and generate one colored line in the test regions.
The presence of this colored line of the test regions indicates a positive result.
We also have the antigen rapid test cassette for the nasal and saliva.
We have various packaging for 1 test, 5tests and 25 tests.

How to use:
1. Remove the test cassette from the sealed foil pouch and use it within 15 minutes.
Best results will be obtained if the assay is performed immediately after opening the foil pouch.
2. Place the Extraction Tube in the work station.Hold the extraction reagent bottle upside down vertically.
Squeeze the bottle and let all of the solution (Approx,250μL) drop into the extraction tube freely without touching the edge of the tube to the Extraction Tube.
3. Place the swab specimen in the Extraction Tube.
Rotate the swab for approximately 10 seconds while pressing the head against the inside of the tube to release the antigen in the swab.
4. Remove the swab while squeezing the swab head against the inside of the Extraction Tube as you remove it to expel as much liquid as possible form the swab.
Discard the swab in accordance with your biohazard waste disposal protocol.
5. Fit the dropper tip on top of the extraction tube.Place the test cassette on a clean and level surface.
6. Add 2 drops of the solution(approx,65μL) to the sample well and then start the timer.
Read the displayed result within 20-30 minutes, and the results read after 30 minutes is invalid.