Dental Low Speed Dental Handpiece Kit
Tealth Foshan Medical Equipment Co., Ltd.- Condition：New
- Certification：TUV, ISO, CE
- Material：Aluminum
- Light Way：Without Light
- Water Way：Outer Channel
- Usage Times：Non-Disposable
Base Info
- Model NO.：S-06
- Application：Adult, Child
- Loading Way：Gland Type
- Head Diameter：Middle Head
- Exhaust Way：Exhaust Outside
- Number of Holes：Two Holes
- Connection：Without Quick Connector
- Rotating Speed：Low-Speed Handpiece
- Noise：Less Than 70dB
- Chuck Type：Latch Type
- Transport Package：Plastic Box
- Specification：Aluminum, stainless steel
- Trademark：TEALTH
- Origin：China
- HS Code：90184100
- Production Capacity：50000PCS,Year
Description
Descriptions
E-type Low-speed 1:1, with external cooling system
Air pressure
245~392kPa (2.5-4.0 kgf/cm²)
Atomized water pressure
200 kPa
Atomized air pressure
200 kPa
Rotation Speed
16 000~20 000r/min
Chuck type
Push button/ Latch type
Bur applicable
Φ2.334~2.350 mm
Noise
≤70dB
Packing list:
- E-type air motor EX-203C 2 Holes: 1 pcs
- Straight nose cone: 1 pcs
- Latch Type Contra Angle handpiece: 1 pcs
- Water spray nozzle: 1 pcs
- Oil spray nozzle: 1 pcs
- Cap Spanner: 1 pcs
- English manual: 1 pcs
[Handpiece inserting & removal]
Inserting
Insert the E-type handpiece onto the motor and turning all the way until it click to stop.
Removal
Grip both handpiece and motor respectively, pulling and separating.
[Forward/Reverse Rotation]
1) Forward Rotation: Turn the FWD/REV change ring to"F".
2) Reverse Rotation: Turn the FWD/REV change ring to "R".
3) When the FWD/REV change ring is positioned in the middle of "F" and "R", the drive air is interrupted and the motor does not rotate.
4) When FEW/REV change ring is positioned in F or R, the rotation speed is maximum.
[Maintenance & Care]
After each treatment, sterilizing handpiece in autoclave according to the following steps:
1. Remove the bur, use brush to clean handpiece, then cleaning outside of handpiece with alcohol solution.
2. Lubricate handpiece.
3. Package into autoclaving pouch.
4. Autoclave the handpiece for 12 min at 135ºC.
5. Dental handpieces cannot be soaked in a disinfectant with acidic liquid. it will seriously damage the bearings and handpiece internal components
6. Do not use an ultrasonic cleaner to clean the dental handpiece.
7. It is not recommended to repair the dental handpiece by little experience person. For repairing, please return to the factory or send to the designated after-sales service maintenance office.