• Model NO.：MIF-01C
• Application：Adult, Child
• Loading Way：Gland Type
• Head Diameter：Middle Head
• Exhaust Way：Internal Exhaust
• Number of Holes：Six Holes
• Connection：Without Quick Connector
• Rotating Speed：Low-Speed Handpiece
• Gear Ratio：1:1
• Transport Package：Plastic Box
• Specification：stainless steel
• Trademark：TEALTH
• Origin：China
• HS Code：90184100
• Production Capacity：50000PCS,Year

Basic Info.

Model NO. MIF-01C Application Adult, Child Loading Way Gland Type Head Diameter Middle Head Exhaust Way Internal Exhaust Number of Holes Six Holes Connection Without Quick Connector Rotating Speed Low-Speed Handpiece Gear Ratio 1:1 Transport Package Plastic Box Specification stainless steel Trademark TEALTH Origin China HS Code 90184100 Production Capacity 50000PCS/Year

Product Description

Name: Low speed 1:1 fiber optic air motor
Model : MIF-01C

Packing List: 
- Fiber optic air motor: 1 pcs 
- Cap Spanner: 1 pcs 
- English manual: 1 pcs 

Features:
1.Push button chuck type,Kavo type internal head
2. Internal irrigation, perfect cooling  systerm
3. Match up with FG bur (Φ1.60mm) and CA bur head(Φ2.35mm)
4. Fiber optic, stable light source
5. Imported bearing from Japan 

Handpiece inserting & removal
Inserting
Insert the E-type handpiece onto the motor and turning all the way until it click to stop.

Removal
Grip both handpiece and motor respectively, pulling and separating.


Maintenance & Care
After each treatment, sterilizing handpiece in autoclave according to the following steps:
1. Remove the bur, use brush to clean handpiece, then cleaning outside of handpiece with alcohol solution.
2. Lubricate handpiece.
3. Package into autoclaving pouch.
4. Autoclave the handpiece for 12 min at 135ºC.
5. Dental handpieces cannot be soaked in a disinfectant with acidic liquid. it will seriously damage the bearings and handpiece internal components
6. Do not use an ultrasonic cleaner to clean the dental handpiece.
7. It is not recommended to repair the dental handpiece by little experience person. For repairing, please return to the factory or send to the designated after-sales service maintenance office.