• Model NO.：R04N-51C
• Application：Adult, Child
• Loading Way：Gland Type
• Head Diameter：Small Head
• Exhaust Way：Internal Exhaust
• Number of Holes：Four Holes
• Connection：Without Quick Connector
• Rotating Speed：Low-Speed Handpiece
• Noise：Less Than 70dB
• Gear Ratio：4:1 Reduction
• Transport Package：Plastic Box
• Specification：Aluminum, stainless steel
• Trademark：TEALTH
• Origin：China
• HS Code：90184100
• Production Capacity：50000PCS,Year

Basic Info.

Model NO. R04N-51C Application Adult, Child Loading Way Gland Type Head Diameter Small Head Exhaust Way Internal Exhaust Number of Holes Four Holes Connection Without Quick Connector Rotating Speed Low-Speed Handpiece Noise Less Than 70dB Gear Ratio 4:1 Reduction Transport Package Plastic Box Specification Aluminum, stainless steel Trademark TEALTH Origin China HS Code 90184100 Production Capacity 50000PCS/Year

Product Description

Name: 4:1 reciprocating endo contra angle handpiece
Model: R04N-51C


4:1 reduction contra angles, there are 5 types heads for different functions.
0.4mm and 1.40mm up&down movement, reciprocating movement hand file for endo treatment.
2.35mm Reciprocating movement engine file for endo treatment.
2.35mm CA head with prophy cap for polishing .



Features:
1. more big torque supply due to 4:1 reduction speeder 
2. water/ air separated supply , make perfect spray for operation. 
3. skid resitance sleeve, FG/CA exchangable head, endo head ,muti-function.
4. it is used for endodontic treatment. 






Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135ºC.

Please do not use the acid solution to scrub, inject or soak the handpiece.
Please do not autoclave the handpiece with residual chemical substances.
Handpiece should be packed well and place at clean and dry room without dust, sulfur and salt.
Please do not touch the handpiece immediately after autoclaving.