• Model NO.：SD-CM16
• Gel Etchant：1*3
• Bonding Brushes：20PCS
• Double Ended Mixing Spatulas：1PCS
• Weight：0.3kg
• Trade Market：Global
• Transport Package：Standard Exported Carton
• Specification：standard
• Origin：China
• HS Code：90184990
• Production Capacity：1000,Month

Basic Info.

Model NO. SD-CM16 Gel Etchant 1*3 Bonding Brushes 20PCS Double Ended Mixing Spatulas 1PCS Weight 0.3kg Trade Market Global Transport Package Standard Exported Carton Specification standard Origin China HS Code 90184990 Production Capacity 1000/Month

Product Description

Dental Composite Material Light Cure Primer Orthodontic Braces Bonding Adhesive 

 

Light-Cure Orthodontic Adhesive:

 

Light-Cure Single Component Push Syringes, A light-activated orthodontic adhesive in a single paste system which provides a longer working time and a rapid setting time. Can be placed directly into bands.

 

Package:

3*3.5g Syringe Paste,1*8ml Primer,1*3 Gel Etchant,40pcs Bonding Brushes,1 Instruction Booklet.3.Weight: 0.3kg
FEATURES & ADVANTAGES:
Unique dispersion technology ensure the filler evenly distributed
Radioopaque and fluoride releasing Optimal polishability and high shade stability.
Excellent handling, not sticky to instrument;
Suitable for most cases of restoration, extensive indication of usage.
INSTRUCTIONS:
(1)Preparation: isolate and prepare tooth.
(2)Cleaning: rinse the preparation with water.
(3)Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to dry for an excessive period of time.
(4)Applying Dentex Self-Etching Light Cure Adhesive (DSA):
dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a non self-etching adhesive, an etching step should be used according to the manufacturer's instruction).
(5)Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposure surface less than 4 mm.
(6)Applying Dentex light cure composite (DLC): place selected DLC into cavity preparation following by light cure. According to following table, the curing time is recommended for different depth and color shades. In order to reduce shrinkage stress, for a large cavity, an increment filling is recommended. In general, 1-2 mm increments are placed into cavity preparation from different sides and the restoration is built incrementally. Each increment is light cured for 30 seconds.
(7)  Finishing: after light cure, adjust restoration.
(8)  Polishing: use polishing strip or disc to polish the surface
WARNING:
Do not use this product for patient who is allergy to methylmethacrylate. Do not use this product with any material contained eugenol.   
PRECAUTIONS:  
Methmethacrylate resins may cause skin sensitization in susceptible persons. In case of contact, wash skin with soap and water. In severe situation, get medical attention.
ATTENTION:  
To an exposed pulp, a pulp capping material such as Calcium hydroxide may be used before using this product.
STORAGE:
Store at 25ºC or less in a cool and dry place and avoid direct sun exposure.
Recap the syringe after use.
DISPOSAL:
After the pro







Payment:
1. Full payment should be made within 5 working days of placing your order.
2. After deliver goods, we will send the tracking number to you.
3. We accept Paypal, Western union and bank transfer.
4. Please make sure your payment address is correct.
5. All prices are EXW.
Shipment:
1. Items will be shipped ASAP after payment is received in 5 working days or more sooner
2. A tracking No. Will be send to your e-mail after your order has been shipped
3. Delivery time: 3-5 working days by UPS/ DHL/TNT/ FEDEX, 5-7 working days by EMS, 7-25 working days by China Post Air Mail.