Nano Hybrid Dental Material Light Cure Composite Resin Kit
Foshan Adelson Medical Devices Co., Ltd.- Usage：Filling Material
- Usage Times：Non-Disposable
- Material：Pasted
- Applicable Departments：Dental Department
- Nature：Specialized Instrument Equipment
- Certification：CE
Base Info
- Model NO.：ADS-Kit1
- Color：A1,A2,A3,A3.5,B1
- Light Cure Composite：4G, Syringe*5
- Total Etching Adhesive：5ml, Bottle*1
- Syringe Needles：5PCS, Box*1
- Applicators Brushes：20PCS,Box*1
- Warranty：1 Year
- MOQ：10 Kits
- Etching Gel：2.5ml,Syringe*1
- Net Weight：188.4G
- Filler Size：0.02-1 Um
- Flexural Strength：135 MPa
- Shrinkage：2.2%
- Filler Load：77% -83% Wt
- Polishing Feature：Good
- Wear Resistance：Good
- Transport Package：Box Packing
- Trademark：DENTEX
- Origin：China
- HS Code：3006400000
- Production Capacity：20000pieces,Year
Description
Description of Dental Light Cure Composite Kit:
(1)Preparation: isolate and prepare tooth.
(2)Cleaning: rinse the preparation with water.
(3)Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to dry for an excessive period of time.
(4)Applying Dentex Self-Etching Light Cure Adhesive (DSA): dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a non self-etching adhesive, an etching step should be used according to the manufacturer's instruction).
(5)Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposure surface less than 4 mm.
(6)Applying Dentex light cure composite (DLC): place selected DLC into
cavity preparation following by light cure. According to following table, the curing time is recommended for different depth and color shades. In order to reduce shrinkage stress, for a large cavity, an increment filling is recommended. In general, 1-2 mm increments are placed into cavity preparation from different sides and the restoration is built incrementally. Each increment is light cured for 30 seconds.
(7) Finishing: after light cure, adjust restoration.
(8) Polishing: use polishing strip or disc to polish the surface
